Professional quality Spring Toggles with E-clips are produced with brass central pin. Available in British and American Standards as well as in M3, M4, M5, and M6 Metric Threads with or without per-assembled Eye Screws, Hook Screws or Studs with brass cap nuts or steel nuts etc. An easy to use cavity fixing that requires no setting tool and is very economical.

A range of Spring Toggle is also available with central pin locked by an E-clip which holds the central pin in place.

Specification & Features

• Spring Toggles have a wide wingspan to give high loadings in both plasterboard wall and ceiling applications
• No protruding flanges allow for ultra flush fixing (Countersunk and Round head only)
• Low profile round or countersunk screw heads suit various fixture recesses. Handy hook profile also available
• Fire resistant, Spreads loads over a wide area
• Do not need a perfect hole to get a perfect fixing
• Machine screw for ease of tightening

Installation

• Drill the recommended sized hole through the plasterboard
• Pass the screw through the fixture and into the toggle for a few turns. Compress the toggle wings and insert the anchor into the hole. The wings will spread behind the cavity wall
• Pull back on the fixture to hold the toggle in place against the reverse side of the cavity wall and tighten with a screwdriver, pulling the wings of the anchor firm against the cavity wall

Application

• Light hook/bracket installation
• Electrical fitting installation
• Bathroom accessory installation

Finishing & Coating

• Natural, Nickle Plated, Tin Plated or any coating as per customer specification

Spring Toggles can be developed and supplied exactly as per customer specifications, design and requirement.