Professional quality Spring Toggles are produced with brass central pin. Available in British and American Standards as well as in M3, M4, M5, and M6 Metric Threads with or without per-assembled Eye Screws, Hook Screws or Studs with brass cap nuts or steel nuts etc. An easy to use cavity fixing that requires no setting tool and is very economical.

A range of Spring Toggle is also available with central pin locked by an E-clip which holds the central pin in place.

Specification & Features

• Spring Toggles have a wide wingspan to give high loadings in both plasterboard wall and ceiling applications
• No protruding flanges allow for ultra flush fixing (Countersunk and Round head only)
• Low profile round or countersunk screw heads suit various fixture recesses. Handy hook profile also available
• Fire resistant, Spreads loads over a wide area
• Do not need a perfect hole to get a perfect fixing
• Machine screw for ease of tightening

Installation

• Drill the recommended sized hole through the plasterboard
• Pass the screw through the fixture and into the toggle for a few turns. Compress the toggle wings and insert the anchor into the hole. The wings will spread behind the cavity wall
• Pull back on the fixture to hold the toggle in place against the reverse side of the cavity wall and tighten with a screwdriver, pulling the wings of the anchor firm against the cavity wall

Application

• Light hook/bracket installation
• Electrical fitting installation
• Bathroom accessory installation

Finishing & Coating

• Natural, Nickle Plated, Tin Plated or any coating as per customer specification

Spring Toggles can be developed and supplied exactly as per customer specifications, design and requirement.